category:Environmental protection / date:2022-03-05 00:19:47 / browse:1064 / comment:3
In order to better prevent excessive water from penetrating into the inner layer of wood floor, when selecting floor cleaner reduce excessive water as much as possible and dry the mop.In addition,DetroitWhat is the size of the wooden floor, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Dont rush to choose the wood floor coated with light wax, and dry it naturally at night.Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment.Detroit,This is more suitable for deeper scratches. If the scratches are shallow there will be no adhesion, and the actual repair will be discounted. It is suggested that partners can aggravate the scratches a little.The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes, so it is generally paved indoors and on the ground where the sun is not direct. The storage temperature is preferably ℃ ~ ℃. In order to prolong the service life of the floor paint cloth and maintain a long-term beauty, daily maintenance and maintenance are also very important. First, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond.Tamale,The floor paint cloth is easy to age under the action of light and heat, the floor is hard and the surface color changes, keep the board surface clean and free of sand and dust friction on the board surface; prevent pollutionThe objects shall be removed in time. Pay attention not to scrub with aone, cyclohexanone, concentrated alkaline water and other organic solvents to prevent color fading, degumming, cracking or warping of the surface. They can be wiped with detergent or detergent. They shall be cleaned with semi dry mop on weekdays to prevent dirty water from penetrating into the joint and damaging the bond. SmellLook at the moisture content.
The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor.It can be seen that wood benefits mankind too much.In todays more and more precious wood, the price of solid wood flooring is also higher and higher.The use of solid wood floor is a high-grade family building material consumed by everyone. Friends with sufficient internal decoration budget can consider setting solid wood floor at home.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Color film layer: various decorative layers of wood grain, stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.Finance Department,The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different; Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, schools office buildings, shopping malls, supermarkets,DetroitGeomembrane waterproof board, vehicles and other places with large flow of people. Look at the section of the board.
Third, it is flame retardant, but it cant be burned.Sampling inspection,The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the material cost is relatively low; because of its low wear-resistant degree, the tool cost during processing is also low. On the contrary,DetroitLaminate floor care, the cost is much higher if the number of wear-resistant revolutions is high.If the scratch is shallow and the paint layer on the surface of the solid wood floor is not damaged, it can be polished with polishing paste immediately after the floor is cleaned.Because the polishing paste is mainly to maintain the luster of the floor and make the surface of the solid wood floor more and more smooth, it is not easy to cause deeper damage to the scratch area, it will be cheaper.But the price is also related to well-known brands. If its family decoration, its better to choose a better one.Solid wood composite floor changes the previous physical structure and has more reliable performance.In terms of price, it is cheaper than solid wood flooring and belongs to medium-sized consumer goods.Pavement building decoration materials are popular materials in family decoration at this stage.Generally speaking, floors between yuan / m and yuan / m are better.Detroit,The real wood floor is processed with a whole plate, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture. Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor, is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde lead and benzene, heavy metals and carcinogens, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material, which is of great significance to protect our earths natural resources and ecological environment.For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!
share 3 Comments
Comment / Cancel reply