SanheCityColor of wood floorReduce radioactive pollution / article1360

category：Building materials / date：2022-05-17 02:15:07 / browse：380 / comment：4

SanheCityHow thick is the damp proof pad of wooden floor, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor, but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.The standard specifications are adopted by most members of the European flooring Producers Association. This is still the case. China also adopts the standard specifications when importing the most advanced laminate processing lines in the world. In other words, the products of large laminate manufacturers processed by imported lines are still the standard specifications. There are many dealers in the market who flaunt themselvesOur products are imported. It is often said that 'imported ones have no wide plate specification and thickness of about mm'. It should be that most imported floors have no wide plate specification and thickened size.SanheCity,It is the best way to polish and wax the solid wood floor once a month but wipe the water and dirt clean before polishing and waxing.How to choose solid wood flooring, solid wood composite flooring and laminate flooring?Laminate flooring is suitable for meeting rooms, offices, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack,SanheCityWooden floor on tile floor, rot, skin clip dead joint, moth eaten, moldy and so on.The general high-quality solid wood multi-layer wood floor shall have clear lines and bright colors on the surface.Miguel-Hidalgo,Waterproof: apply waterproof resin or other waterproof materials at the tongue and groove of the laminate floor, so that the moisture and moisture outside the floor are not easy to invade and the formaldehyde inside is not easy to release, so that the environmental protection and service life of the floor are significantly improved;Especially when laying in a large area, it is inconvenient to leave expansion joints and compression strips, it has entered institutions and institutions such as colleges and universities hospitals and outpatient departments in China, mainly LVT latch floor (thin thickness, the key is mm) and WPC latch floor (ordinary thin thickness: mm, mm). SPC floor is a new product in recent five years. Most LVT / WPC are made of steam pressure,Customized delivery time up to days.However, SPC floor can be formed by integrated extrusion process, and the delivery time can be shortened several times.Lacquer cloth green ( piece)

The joint of the floor adopts the form of latch, which controls the vertical displacement of the floor and the horizontal displacement of the floor;The original tenon and groove type, which is often called tongue and groove floor, can only control the vertical displacement of the floor.No matter how early the wooden floor plate is, there is no tenon and groove at the joint, and the displacement in any aspect can not be controlled. Therefore, the floor plate often tilts up and stumbles when walking, which is inconvenient.The wear-resistant layer on the surface of laminate floor has experienced unique solutions, high strength, no trace in daily application, and beautiful and generous.The third kind: you can smell the faint smell of wood. This floor shows that there is little glue content.It can reach European standard E levelSampling inspection,SanheCityHow much is laminate floor,Secondly, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.

If you want to polish a lot of things, you can minimize the spread of dust in the whole house by closing the door and covering it with plastic cloth, Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time. Select the number of wear-resistant revolutions.The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride is an environment-friendly, non-toxic and renewable resource. It has been widely used in people&#;s daily life, such as tableware and medical infusion pipe bags. Its environmental protection does not need to be worried.SPC floor (sheet) is mainly composed of natural stone powder which does not contain any radioactive elements after testing by national authoritative departments. It is a new green and environmental protection ground decoration material.SanheCity,UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[] Ultra light and ultra-thinMolded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop.