libraryThe wooden floor is goodWhat are the commonly used materials for construction / af6ed7_29_13826

category：Environmental protection / date：2024-01-04 00:35:55 / browse：65 / comment：4

Three layer solid wood composite floor. High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly and the price is much lower than that of solid wood flooring.library, The composite floor has stable quality and is not easy to be damaged. Anti slip, more astringent in case of water, not easy to fall.Hetafe,PVC flooring has certain bacteriostatic properties. Some excellent PVC flooring are added with bacteriostatic agents in the production process, which has a strong ability to remove most bacteria and inhibit bacterial reproduction.Therefore, the natural environment with high requirements for disinfection and sterilization, is the most ideal choice. Free formaldehyde emissionSelling price of solid wood flooring

High concentration formaldehyde is a genotoxic chemical.In animal experiments, high concentration inhalation in the laboratory can cause nasopharyngeal tumors.High quality flooring shall be made of high-quality materials, which shall be natural, high-density and moderate.Some people think that the higher the density of wood-based panel, the better. In fact, if the density is too high, the higher its water absorption and expansion rate is which is easy to cause floor deformation.Second, rely on advanced floor production lines, equipment and strict technology to produce first-class floors.The judgment of floor quality can also be judged from the quality inspection certificate, other honorary certificates such as national quality inspection free products, ISO quality system certification and ISO environmental system certification, because the acquisition of these honors will inevitably lead to the fine operation of the enterprise. A week later, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.Manufacturing cost,The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one) apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Second, the price is high and the cost performance is not high. Compared with the reinforced composite floor and double-layer composite floor, the price is more expensive;Of course, solid wood flooring with pure natural wood is the best commodity for environmental protection. How many additives are needed for composite flooring, and various index values such as indoor formaldehyde exceed solid wood flooring.The patent of the utility model is formed by cross lamination of boards of different greening plants, has small dry shrinkage and wet expansion rate, good specification reliability, preserves the pure natural wood texture of solid wood floor, and has comfortable feet and feet.Solid wood composite floor not only has the reliability of laminate floor and the beauty of solid wood floor, but also has the advantages of environmental protection.

If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it.investment, All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification.The formaldehyde emission of pure solid wood floor is very small. If the budget is sufficient, it is recommended to use pure solid wood floor. The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.library,The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat,libraryList of top ten famous brands of solid wood composite flooring, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting,libraryHow much is the price of laminate floor? One square meter, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, long service life and good effect.As for the ground high profile, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.In order to better prevent excessive water from penetrating into the inner layer of wood floor, when selecting floor cleaner, reduce excessive water as much as possible and dry the mop.In addition, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Don&#;t rush to choose the wood floor coated with light wax, and dry it naturally at night.From the surface of the floor, the solid wood floor can be polished and painted again even if the surface is damaged because it is the whole piece of wood.Tianhe floor adopts Jianfu paint, which is wear-resistant, scratch resistant, excellent surface performance, multilayer boards and laminates cannot do this. If there is a problem with the surface