category:Environmental protection / date:2024-05-11 01:24:28 / browse:58 / comment:6

If the address cannot be used temporarily, the indoor air quality and commodity circulation shall be maintained, and it shall not be covered with plastic boxes or newspapers, so as to prevent the long-term surface paint layer from becoming sticky and dull.Fifth, the total thickness of the floor is about , cm, which is also related to his total price.Lakovsky, The ground defect shall not be too large to ensure that the ground is flat and free of cracks.Mute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat, the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.Surgutt,Molded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop.If you want to polish a lot of things, you can minimize the spread of dust in the whole house by closing the door and covering it with plastic cloth, tarpaulin and tape.Hardwood floors often need to be polished during installation.If the new floor is to be sent to a room equipped with large equipment, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape.


LakovskyHow to stick the floor leatherIntroduction to manufacturing method



Wear resistance,LakovskyWhat brand of composite floor has good quality, wear resistance Grade TConclusion of inspectionSecond,LakovskyOffice solid wood floor, the price is high and the cost performance is not high. Compared with the reinforced composite floor and double-layer composite floor, the price is more expensive;Workshop cost,Men&#;s long-term inhalation will cause men&#;s abnormal sperm and death.First, the scope of application is small.thickness Main performance.


LakovskyHow to stick the floor leatherIntroduction to manufacturing method



qualityHome page recommendation,Whether it is solid wood composite floor or solid wood floor, its surface needs to be maintained and does not want to strengthen the surface of the floor.When cleaning the solid wood floor, remember not to wipe the solid wood floor directly with wetland.Please choose a special detergent for wood floor cleaning to keep the wood floor in its natural primary color and prevent the wood floor from cracking.Fear of water and moisture: the base material of laminate floor is medium and high density board, with small relative density and large expansion coefficient. Once the reinforcing layer is filled with water after paving, if it is not wiped in time, it is easy to cause blistering and deformation due to water absorption and expansion. Its moisture resistance is not strong, and its stability is poor in humid environment. Common floor types:LakovskySPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth also known as floor leather (not PVC plastic floor), substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, product mark, grade, batch number quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price.quality

Copyright Notice: This article is not authorized by any Creative Commons agreement, you can freely reprint or use it in any form

Comment area

share 6 Comments

user 237HP184976196 / 2024-05-11 09:14:24 / reply
In anticipation, I finally waited for my beloved LakovskyHow to stick the floor leather, I wish the boss a prosperous business and wealth!
user 914HP134131469 / 2024-05-11 10:24:08 / reply
In anticipation, I finally waited for my beloved LakovskyHow to stick the floor leather, I wish the boss a prosperous business and wealth!
user 323HP155335083 / 2024-05-11 09:52:37 / reply
The quality is very good, really good, LakovskyHow to stick the floor leather the same as the picture, the packaging and quality are also very good,
user 60HP184127502 / 2024-05-11 08:55:15 / reply
After looking for the LakovskyHow to stick the floor leather from your family for a long time, I mustered up the courage and the quality of the inspection was very good.
user 416HP186602172 / 2024-05-11 09:49:34 / reply
LakovskyHow to stick the floor leather The delivery is fast and the quality is good, but the logistics is a bit slow. Overall it is good, continue to support!
user 122HP117294921 / 2024-05-11 09:43:12 / reply
Since searching and shopping online, you never have to go out and wander around. Your LakovskyHow to stick the floor leather quality is guaranteed, logistics and delivery are fast, big brands are better than offline stores, and I will review them if necessary in the future!

Comment / Cancel reply

Required

Optional

Optional

◎Welcome to discuss, please express your views here.

Hello, welcome to this website!

Label list

Links